ADC 400F Network Card User Manual


 
Chapter 4: Setting Up For Configuration
Megabit Modem 400F User Manual 23
ACCESSING THE 400F WEB PAGES
Type http://192.168.0.1 in the Location Bar field of the Web browser (as shown below), then press
. (192.168.0.1 is the default IP address for the Ethernet port and is a private address
specified for use by RFC 1918. If you change the Ethernet IP address through the management
port, you will enter the new IP address in the
Location Bar.)
The Megabit Modem 400F Web page displays with two primary frames:
Frame A contains the navigation menus. Use the menus to select the configuration or
management page you want to view in Frame B.
Frame B displays the configuration or management page associated with the menu item you
selected from the navigation menu in Frame A.
The BSP Version and Software Version numbers reflect the current software
version that you have on your modem. The version shown in the figure above
is for example only.
ENTER
Location Bar
http://192.168.0.1/index.htm