Filter
Top Products
Checking LED Indications
6 MM701F User Manual
CHECKING LED INDICATIONS
Your service provider sets up the ADSL parameters for your service. The MM701F must have
the DSL SYNC LED lit before you can connect sessions with your service provider.
The table below describes LED indications for all operational modes. LEDs on the MM701F
front panel provide continual status at-a-glance for network connections.
LED State Description
POWER On green MM701F has power.
Off MM701F does not have power.
Ethernet
LINK On green A PC, hub, or other network device is connected to the MM701F
10Base-T interface.
Off No device is connected to the MM701F 10Base-T interface.
TX Flashing green MM701F is transmitting data to devices on the LAN.
Off MM701F is not transmitting data to the LAN.
RX Flashing green MM701F is receiving data from devices on the LAN.
Off MM701F is not receiving data from the LAN.
COL Flashing green Ethernet packet collisions are occurring on the LAN.
Off No Ethernet packet collisions are occurring.
DSL
SYNC On green DSL transceiver is synchronized (connected) and in normal operation
mode.
Flashing green Slow flashing green indicates that the DSL transceiver is in a start-up
or handshaking sequence. Fast flashing green indicates the DSL
transceiver is in training sequence.
Off DSL transceiver is not detecting a transceiver at the far end and is not
connected.
TX Flashing green MM701F is transmitting data over the DSL connection.
Off MM701F is not transmitting data over the DSL connection.
RX Flashing green MM701F is receiving data over the DSL connection.
Off MM701F is not receiving data over the DSL connection.
MAR On green DSL margin is above the preset margin value.
Off DSL margin is at or below the preset margin value.