Filter
Top Products
Chapter 3: Managing the Modem Using a Web Browser
MM701F User Manual 33
2 Configure the following parameters as supplied by your service provider:
3 Click
Apply then save changes using “Saving Changes” on page 39.
Parameter Description
ADSL Standard for physical
layer interface
Select from the options:
• ITU G.992.2 G.lite
• ITU G.992.1 G.DMT (default)
• ANSI T1.413 Issue 2
• Multimode
Trellis Encoding Enable or Disable (default) Trellis Encoding. Trellis Encoding allows
for high data speeds and reduces transmission errors.
Bin Overlap Mode Select either FDM (default) or EchoCancellation.
Transmit Power Attenuation Select a value from 0 to 12 decibels (0 is the default).
Coding Gain Select either Auto (default) or a value from 0 to 7 decibels.
Maximum Bits per Bin Select a value from 2 to 15 (14 is the default).
Transmit Start Bin Select a value from 6 to 31 (6 is the default).
Transmit End Bin Select a value from 6 to 31 (31 is the default).
Receive Start Bin Select a value from 6 to 255 (32 is the default).
Receive End Bin Select a value from 6 to 255 (255 is the default).
Maximum Downstream Rate Select a value from 32k to 12000k (12,000 is the default).
SNR Margin Limit Select a value from -64 to 63 (4 is the default).