Filter
Top Products
Setting Up a Telnet Session
44 MM701F User Manual
SETTING UPATELNET SESSION
Make sure your PC is on the same IP subnet as the modem as described in “Setting Up the PC”
on page 10. To set up a telnet session, specify the LAN IP address of the modem to establish
communication. The default LAN IP address is 10.0.0.1. If this IP address has changed, contact
your network administrator.
Below is an example using the telnet application in Microsoft Windows 98:
1 Click
Start, Run to access the Run dialog.
2 In the
Open box, enter the telnet command and IP address (for example: 10.0.0.1) then click
OK to start the Windows telnet client and access the password prompt. Enter the telnet
password to access the
Main Menu page. The default telnet password for the MM701F is
password.
You cannot manage the modem through the console port and a telnet session
at the same time.