Filter
Top Products
Managing DSL
54 MM701F User Manual
The table below describes each of the parameters displayed in the ADSL Current Settings
screen:
ADSL Parameter Description
Standard May be either ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt),
ITU G.992.2 (G.lite) or Multimode.
Trellis Indicates whether Trellis coding is enabled or disabled.
Trellis Encoding allows for high data speeds and reduces
transmission errors.
BinOverlapMode Valid options are FDM or Echo Cancellation.
TxPwrAtten The current transmit power attenuation level. May range
from 0 dB to 12 dB.
CodingGain Coding Gain refers to the expected improvement or gain
due to trellis coding. It is used to help determine the
downstream connection rate.
MaxBitsPerBin The maximum number of receive bits per bin that can be
selected.
TxStartBin The lowest bin number allowed for the transmit signal.
TxEndBin The highest bin number allowed for the transmit signal.
RxStartBin The lowest bin number allowed for the receive signal.
RxEndBin The highest bin number allowed for the receive signal.
MaxDownstreamRate The maximum downstream transmission rate.
SNRMarginLimit The signal-to-noise ratio limit. This can be set between -64
and +63. The margin LED on the front panel indicates that
the actual SNR is greater than the configured value.
Apply Apply settings.