Filter
Top Products
Chapter 4: Managing the Modem Using the Console Port & Telnet
MM701F User Manual 49
Valid values for the parameters shown on the LAN Setup screen are defined in the following
table.
LAN Parameter Valid parameter Values
LAN Protocol Select the message format to be used for your LAN.
• Select Bridge if the LAN forwards packets based on
MAC addresses. If you selected RFC 1483 Bridge
protocol for the WAN sessions, select Bridge for the
LAN traffic.
• Select Router if the LAN routes packets based on IP
addresses. If you selected RFC 1483 Router or PPP
protocol for the WAN sessions, select Router for the
LAN traffic.
IP address See your LAN administrator for LAN IP addresses.
However, if you want to change the IP address, enter an IP
address for the LAN (10Base-T) port provided by the LAN
administrator. Or, you can use the default IP address for
the LAN port which is 10.0.0.1. If you choose to use the
default IP address, ensure that the devices on your LAN are
on the same subnet as the MM701F LAN port.
If you select Client for the DHCP configuration (below in
this table), a DHCP server on your LAN automatically
provides the IP address.
IP Net Mask Enter the subnet mask for the LAN (10Base-T) port
provided by the LAN administrator. Or, you can use the
default subnet mask for the LAN port which is
255.255.255.0. If you choose to use the default subnet
mask, ensure that it allows devices on your LAN to access
the MM701F LAN port.
Default Gateway Enter the default IP address for a default gateway that is
supplied by the service provider.
DHCP See your LAN administrator for the DHCP selection.
However, if you want to change that DHCP selection
through the Web interface, select one of the following:
• None—DHCP is not enabled.
• Client—The MM701F is a DHCP client and can be
served an IP address for the LAN port by a DHCP server
on your LAN.
• Server—The MM701F is a DHCP server and can serve
IP addresses to devices on your LAN. See DHCP Range
Low and High for the ranges of IP addresses that the
MM701F can serve.