Filter
Top Products
StorNext File System and Storage Manager Installation Guide 53
5 Click Next to continue.
The Complete Add Drive Task screen appears.
6 Review your selections. Click Next to complete the task or Back to make changes.
7 Once a status screen displays the successful addition of the tape drive, click Next.
The Tape Drive Introduction screen appears.
8 Do one of the following:
• Add more tape drives. Click Next to repeat the Adding a Tape Drive procedure (Step 1
on page
50).
• Click Done to finish the Adding a Tape Drive procedure.
The Configuration Wizard screen (Figure 3 on page 23) is shown with a Completed status
next to Step 4.
9 Click Next to continue with Step 5: Adding Media on page 53.
Step 5: Adding Media
Use this task to add media to a configured library.
CAUTION
Make sure there are no media in your tape drives before continuing
with this procedure.