Filter
Top Products
Introduction
9
Figure 5. DLT Data Cartridge
Cautions
Always remove
any
cartridge from the drive before turning off host
system power. Failure to remove a cartridge can result in cartridge and
drive damage.
When a cartridge is removed from the drive, return it to the plastic case to
prolong the cartridge life.
Other Requirements
SCSI Host Adapter
Your DS9000 Series must be connected to either an integrated SCSI host or a separate SCSI interface (host adapter)
card installed in the computer – either directly to the I/O connector on the card or as part of an existing SCSI chain.
The host adapter you choose will depend on your system requirements and your needs. If you are not sure about your
host adapter requirements, please call ADIC’s Technical Assistance Center (ATAC) and ask for assistance. The SCSI
interface must be installed before you connect the DS9000 Series.
Application Software
A variety of backup and data storage software is available for use with your DS9000 Series. The software you use
will depend upon your storage needs and the system you are using. Please check with ADIC Sales or Customer
Assistance if you have a question on the compatibility of a particular software package.
Now you are ready to connect the DS9000 Series to your host computer. Follow the instructions provided in the next
chapter.
Orange
Indicator
Write-protect
Switch
Write-Enabled
Write-Protected