Filter
Top Products
Operation and Maintenance
25
Drive Operating Condition LCD Message
If new tape, or the drive cannot
initialize the tape.
followed by:
followed by:
A hardware error occurs during
normal operation.
Loading the Data Cartridge
Warnings
Before loading into a drive, ensure that all other items from this package
are separated from the cartridge.
Never press in on the hub portion of the data cartridge.
Static electricity may cause the label or other items included in the
package to occasionally cling to the DLT cartridge.
In order to write data to, or erase data from the cartridge, check that the
Write-Protect
switch on the
cartridge is in the write-enabled position - all the way to the right.
Caution
A data cartridge can be loaded only when the
Operate Handle
LED is
ON
.
Do not attempt to open the
Cartridge Insert/Release Handle
unless this
LED is
ON
steady.
Lift up on the
Cartridge Insert/Release Handle
.