Filter
Top Products
22
Operation and Maintenance
LCD Messages (DS9400D/L, DS9700D and DS9800D only)
The following table describes the messages displayed by the LCD during normal operation:
Drive Operating Condition LCD Message
No tape in drive.
When loading or unloading a tape.
“type” = 4000 OMX (DS9400D/L), 7000 OMX (DS9700D) or
8000 OMX (DS9800D).
During the loading process the display may toggle between
“Loading >>>” and “Calibrating >>>”.
Note
While loading the tape, the drive will enter a false
Ready Mode condition for a short period. During this
false state the Tape In Use LED will continue to
blink. Do not attempt any operations while the LED
is blinking.
When tape is unloaded.
Continued on next page.