Filter
Top Products
Unit Installation NetVanta 3200/3300/3400 Series
76 Copyright © 2012 ADTRAN, Inc. 61200860L1-34AB
Using a USB Cellular Modem with the NetVanta USB WWAN NIM
The NetVanta USB WWAN NIM contains a Type A USB connector that supports a variety of third-party
USB cellular modems.
Visit the NetVanta USB WWAN NIM product page at http://www.adtran.com for a list of
supported third-party USB cellular modems.
• Always remove power from the unit prior to removing or installing a module.
• Improper installation may result in damage to the modules.
Instructions for Installing a USB Cellular Modem in the USB WWAN NIM
Step Action
1 Remove power from the base unit.
2 Remove the cover from the base unit’s option slot.
3 Slide the USB WWAN NIM into the option slot until the module is firmly seated against the
chassis.
4 Secure the pins at both edges of the module.
5 Restore power to the base unit.
6 Refer to the quick start guide that shipped with the NetVanta USB WWAN NIM for instructions
on obtaining a cellular account and activating your USB cellular modem.
An optional USB Locking Mechanism is available from ADTRAN (P/N 1700643G1) to
lock the USB to the NetVanta USB WWAN NIM.