Filter
Top Products
Installing Hardware and Software Unified Communications Server
8 Copyright © 2009 ADTRAN, Inc. 619500001-19A
Installing Hardware and Software
To install the software, you need temporary use of the following:
• Monitor
• Keyboard
•Mouse
Connect the monitor, keyboard, and mouse to the server computer according to the manufacturer’s
instructions.
The server also requires a CD-ROM drive for the product CD.
Installing the Intel Dialogic Card
You will need the following to install the Intel Dialogic card:
• One of the following Intel Dialogic cards:
• Server on which the UC server software is to be installed
• Phillips 2 x 4 screwdriver (this may be necessary depending on the server case)
To install the Intel Dialogic card
Refer to the card's instructions and follow these steps:
1. Open the computer chassis.
2. Install each Intel Dialogic card in an available PCI slot.
Make sure that the server is unplugged before you proceed.
Remember to follow proper static grounding procedures.
DEFINITY/Communication Manager D/82JCT-U D/82JCT-PCIUNIV
IP Office, DEFINITY/MultiVantage, MERLIN
MAGIX PBX or Generic Analog Integration
D/120JCT-LS D/41JCT-LS D/4PCIUF