Filter
Top Products
106
PPC-S123 User’s Manual
If you want to completely disassemble the panel PC, follow the
step-by-step procedures below. Users should be aware that Advan-
tech Co., Ltd. takes no responsibility whatsoever for any problems or
damage caused by the user disassembly of the panel PC. Make sure
the power cord of the panel PC is unplugged before you start disas-
sembly.
The following procedures do not include the detailed disassembly
procedures for the CPU, HDD, and SDRAM; all of which can be found
in Chapter 3.
1. Detach the CPU heatsink and HDD carrier as described in Chapter
3. Then disconnect the HDD cable by pulling the connector from
the CPU board as shown in Figure B-1.
Figure B-1: Disconnect the IDE connector
IDE
Connector