Filter
Top Products
Chapter 3 Hardware and Peripheral Installation
21
4. Insert a flat-headed screwdriver into the side hole of the CPU at an
upward perpendicular angle to the CPU, as shown in Figure 3-5. Make
sure the slightly bend screwdriver head is pointing outward.
Figure 3-4: Place CPU push cover over CPU
2. Insert the CPU in the correct orientation and gently slide the CPU in.
It should insert easily. Make sure the pin of the CPU corresponds with
the hole of socket. Do not use excessive force.
3 Place the metal CPU push cover on the top of the CPU as shown in
Figure 3-4.