Filter
Top Products
12
PPC-S123 User's Manual
2.2 Installation Procedures
2.2.1 Connecting the power cord
The panel PC can only be powered by a DC electrical outlet
(19Vdc~26Vdc, 3A max.). Be sure to always handle the power cords by
holding the plug ends only. Please follow the Figure 2-4 to connect the
male plug of the power cord to the DC inlet of the panel PC.
2.2.2 Connecting the keyboard or mouse
Before you start the computer, please connect the Y-shaped adaptor to
the PS/2 mouse and keyboard port on the I/O section of the panel PC,
then connect the necessary mouse or keyboard to the Y-shaped
adapter or serial ports.
2.2.3 Switching on the power
When you look at the rear side of the panel PC, you will see the power
switch as shown in Figure 2-2.
Figure 2-4: Connect the power cord to DC inlet
DC inlet
AC/DC power
adapter