Filter
Top Products
Chapter 8 Award BIOS Setup
75
8.6 Power Management Setup
Power Management
When enabled, allows you to use Power Management features.
The options are: Disabled (Default), Enabled.
PM Control by APM
The option "No" allows the BIOS to ignore the APM (Advanced
Power Management) specification. Selecting "Yes" will allow the BIOS
to wait for APM's prompt before it enters Doze mode, Standby mode,
or Suspend mode. If the APM is installed, it will prompt the BIOS to
set the system into power saving mode after all tasks are done.
The options are: Yes (Default), No.
Video Off Option
This feature provides the selections for the video display power
saving mode. The option "Susp, Stby--Off" allows the video display to
go blank if the system enters Suspend or Standby mode. The option
"Suspend--Off" allows the video display to go blank if the system
Figure 8-5: Power management setup screen