Filter
Top Products
:DRIVer:LOAD
< driver_block>
DIAGnostic:DRIVer:LOAD < driver_block> loads the instrument driver
contained in the driver_block into a previously created DRAM segment.
Parameters Parameter
Name
Parameter
Type
Range of
Values
Default
Units
driver_block arbitrary block
program data
See "Parameter Types" at the
beginning of this chapter.
none
Comments • driver_block is the actual binary driver data to be transferred.
• Related Commands:DIAG:DRAM:AVAilable?,
DIAG:DRAM:CREate, DIAG:DRIVer:LIST...?.
Example Download a driver block.
DIAG:DRIV:LOAD
downloads the driver < driver_block> to DRAM memory.
:DRIVer :LOAD:
CHECked
< driver_block>
DIAGnostic:DRIVer:LOAD:CHECked < driver_block> loads the instrument
driver contained in the driver_block into a previously created DRAM segment.
The driver_block is formatted in the same data byte format used by
DOWNload:CHECked.
Parameters Parameter
Name
Parameter
Type
Range of
Values
Default
Units
driver_block arbitrary block
program data
See "Parameter Types" at the
beginning of this chapter.
none
Comments • driver_block is the actual binary driver data to be transferred.
• This is the only way to download a device driver over a serial (RS232C)
line.
• Related Commands:DIAG:DRAM:AVAilable?,
DIAG:DRAM:CREate, DIAG:DRIVer:LIST...?.
Example Download the driver named DIGITAL.DC.
DIAG:DRIVer:LOAD:CHEC
downloads the driver < driver_block> to DRAM memory.
DIAGnostic :DRIVer:LOAD < driver_block>
System Instrument Command Reference 7-17