Filter
Top Products
:DRIVer :LIST[:type]? DIAGnostic:DRIVer:LIST[:type]? lists all drivers from the specified table found
on the system. If no parameter is specified, all driver tables are searched and the
data from each driver table is separated from the others by a semicolon.
Parameters Parameter
Name
Parameter
Type
Range of
Values
Default
Units
type discrete ALL| RAM| ROM ALL
For each driver listed, the following items are returned:
NAME, IDN_MODEL, REV_CODE, TABLE
Parameter Description
NAME The instrument name. This is the same label that
appears on the instrument selection menu.
IDN_MODEL The model name. This is the same model name as
used in the response to the *IDN? command.
REV_CODE The revision code. It is in the form A.nn.nn where A
as an alpha character
TABLE The name of the table the driver was found in.
This will be RAM or ROM.
Comments • DIAGnostic:DRIVer:LIST? lists all drivers found in the system.
• DIAGnostic:DRIVer:LIST:RAM? lists all drivers found in the RAM
driver table DRAM.
• DIAGnostic:DRIVer:LIST:ROM? lists all drivers found in the ROM
driver table.
• Related Commands:DIAG:DRAM:AVAilable?,
DIAG:DRAM:CREate, DIAG:DRIVer:LOAD...
Example List all drivers in the system.
DIAG:DRIV:LIST? lists all drivers currently loaded.
Example List all drivers in ROM.
DIAG:DRIV:LIST:ROM? lists all of the drivers currently
loaded in ROM.
DIAGnostic:DRIVer :LIST[:type]?
7-18 System Instrument Command Reference