Using the System
Instrument Menu
The System Instrument menu allows you to:
• Set or read the system GPIB address
• Reset (reboot) the mainframe
• Display the logical addresses of installed instruments
• Display information about installed instruments
How to Set or Read the System GPIB Address
Enter new GPIB address, press Return
(range= 1 through 30)
SCPI command used:
SYST:COMM:GPIB:ADDR?
SCPI command used:
SYST:COMM:GPIB:ADDR < addr>
Typical GPIB address
Using the Display Terminal Interface 3-5