Filter
Top Products
Agilent E1332A 4-Channel Counter/Totalizer Menu
Menu Levels and Content
Level 1 Level 2 Level 3 Level 4 Level 5 User Entry Command(s) Used Description
(continued from previous page)
TIMEINT CHAN1 TRIG:SOUR IMM;:MEAS1:TINT? Time interval measurement on channel 1
CHAN3 TRIG:SOUR IMM;:MEAS3:TINT? Time interval measurement on channel 3
POS_PW CHAN2 TRIG:SOUR IMM;:MEAS2:PWID? Positive pulse width measurement on channel 2
CHAN4 TRIG:SOUR IMM;:MEAS4:PWID? Positive pulse width measurement on channel 4
NEG_PW CHAN2 TRIG:SOUR IMM;:MEAS2:NWID? Negative pulse width measurement on channel 2
CHAN4 TRIG:SOUR IMM;:MEAS4:NWID? Negative pulse width measurement on channel 4
UDCOUNT CHAN1 START TRIG:SOUR IMM;:CONF1:UDC;:INIT1 Up/down count, subtract ch. 2 count from ch. 1
count
READ FETC1? Get up/down count from channels 1 & 2
CHAN3 START TRIG:SOUR IMM;:CONF3:UDC;:INIT3 Up/down count, subtract ch. 4 count from ch. 3
count
READ FETC3? Get up/down count from channels 3 & 4
TOTALIZ CHAN1 START TRIG:SOUR IMM;:CONF1:TOT;:INIT1 Totalize on channel 1
READ FETC1? Get totalize count on channel 1
CHAN2 START TRIG:SOUR IMM;:CONF2:TOT;:INIT2 Totalize on channel 2
READ FETC2? Get totalize count on channel 2
CHAN3 START TRIG:SOUR IMM;:CONF3:TOT;:INIT3 Totalize on channel 3
READ FETC3? Get totalize count on channel 3
CHAN4 START TRIG:SOUR IMM;:CONF4:TOT;:INIT4 Totalize on channel 4
READ FETC4? Get totalize count on channel 4
TEST * TST? Run self-test, display results ( + 0= pass; any other
number= fail)
†Enter voltage values in volts. Typical examples are: + 3.5, -2, + 500E-3.
‡Enter frequency value in hertz. Typical examples are: 60, 120, 1E3.
Using the Display Terminal Interface 2-25