Agilent Technologies epsg1026386 Scanner User Manual


 

EMG Business Management System Manual
Doc # epsg1026386
Rev. 112
Page 5 of 35
The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.
This manual contains links to subordinate documents that are restricted to Agilent personnel only
and may not work if accessing this document from a public site.
The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp
(c) Agilent Technologies, Inc. 2002, AGILENT TECHNOLOGIES
2.2 The EMG organization chart
Depicted below is the management with executive responsibility in EMG and has the authority to
establish or infuence changes to the EMG Quality Policy and Business Management System.
See the following URL for current EMG organization chart:
http://epsg.communications.agilent.com/about/org/
a) EMG President & General Manager jointly owns the BMS with the EMG VP of Customer Experience
& Quality.
b) EMG VP of Customer Experience & Quality (CE&Q) ensures EMG has a robust Business
Management System (BMS) to address customer expectations, quality and regulatory requirements.
c) The EMG Management Representative (BMS Manager) is appointed by EMG Top Management,
reports to the EMG VP of Customer Experience & Quality and has the responsibility and authority to
ensure the EMG Business Management System is effectively established and maintained per the
regulations and standards cited in ISO9001 clause 5.5.2.
d) EMG TAG Team: This team is lead by the EMG Manager Representative (BMS Manager). This team
exists to share best practices/learning, improve quality, and add rigor to the BMS.
e) BMS Representatives assist in the implementation of the BMS and are typically dotted line/support
the Business Management System Manager.
f) Site Management Liaisons are identified to assist the BMS representatives as appropriate.