Filter
Top Products
16
2.2 Web Management Interface Instructions
APO1000/APO1010 supports web-based configuration. Upon the completion of hardware installation, APO1000/APO1010
can be configured through a COMPUTER by using its web browser such as Internet Explorer or Mozilla Firefox.
1. Default IP Address : 192.168.2.254
2. Default IP Netmask : 255.255.255.0
3. Default User Name and Password :
The default user name and password for both root manager account and admin manager account are as follows:
Mode CPE Mode AP Mode WDS Mode
Client Bridge +
Universal Repeater Mode
Management Account
Root
Account
Admin
Account
Root
Account
Root
Account
Root
Account
User Name
root admin root root root
Password
default admin default default default
Step
IP Segment Set-up for Administrator's Computer
Set the IP segment of the administrator's computer to be in the same range as APO1000/APO1010 for accessing the
system. Do not duplicate the IP Address used here with IP Address of APO1000/APO1010 or any other device within the
network
Example of Segment :
The valid range is 1 ~ 254 and 192.168.2.254 shall be avoided because it is already assigned to APO1000/APO1010.
192.168.2.10 is used in the example below.
Î IP Address : 192.168.2.10
Î IP Netmask : 255.255.255.0
Launch Web Browser
Launch web browser to access the web management interface of system by entering the default IP Address,
http://192.168.2.254
, in the URL field, and then press Enter.
System Login