Filter
Top Products
60
4.2.3 WDS Setup
The administrator could create WDS Links to expand wireless network. When WDS is enabled, access point functions as a
wireless bridge and is able to communicate with other access points via WDS links. A WDS link is bidirectional and both
side must support WDS. Access points know each other by MAC Address. In other words, each access point needs
to include MAC address of its peer. Ensure all access points are configured with the same channel and own same
security type settings.
Figure 4-2 shows Point to Multiple Points with different VLAN settings
Figure 4-2 Point to Multiple Points with different VLAN Tag
Please click on Wireless -> WDS Setup and follow the below setting.
Note that VLAN ID in the WDS MAC List setting will only be tagged to egress packets on the wired Ethernet port.
Ensure to match VLAN ID used on the network of the peer. WDS link won’t carry tags at all.
WMM : By default, it’s “Disable”.
Select “Enable”, then packets with WMM QoS will take higher priority.
APO1000/APO1010