Filter
Top Products
2. In stal la ti on in struc tions
»
These installation instructions are intended for persons
with skills in electrical and mechanical areas due to their
training, experience and received instructions.
Personnel using these installation instructions must be
instructed in the regulations for the prevention of
accidents, the operating conditions and safety regulations
and their implementation.
Ensure in each case that the personnel are informed.
The installation instructions provided in the corresponding
operating instructions apply for all connected equipment.
Observe safety regulations with regard to lifting gear
handling
All installation work must be carried out with the equipment
disconnected from electrical power and compressed air
supply.
L
For installation work taking place at heights of over
approx.1829mm (6 ft), use only ladders or similar
equipment and working platforms intended for this
purpose. At greater heights, the proper equipment for
protection against falling must be worn.
Use only suitable lifting gear which is in proper working
order and load suspension devices with sufficient carrying
capacity. Do not stand or work under suspended loads!
Use suitable workshop equipment.
046-3MS
SKW
In stal la ti on in struc tions 15