Filter
Top Products
2.1. In stal la ti on
Installation is possible in any position. A mounting bracket is already attached.
»
The control unit must be accessible at any time
Install VA-steel pipe bends (SKW 40, SKW 50) when
conveying abrasive materials.
SKW 65 may not be used for conveying abrasive
materials.
Install the SKW in such manner that differences in conveying distances for the
two components are avoided.
Please note that the maximum ambient temperature near the SKW must not
exceed 45 °C (113°F).
Remove the plugs from the
pipe bends.
Install the regrind line at intake
port 2 of the SKW.
Install the virgin material line
at intake port 1 of the SKW.
Install the feed line to the
hopper loader at the outlet port
of the SKW.
Align both suction pipes
equally in order to avoid
inaccurate percentage
preselection results.
046-3MS
SKW
In stal la ti on in struc tions 17
Assembly SKW