Filter
Top Products
2.2. Elec tri cal con nec ti on
2.2.1. Con nec ti on to a sing le con vey or unit CSE 2/CSE 5
»
Electrical connections are to be made by trained personnel
only.
Observe the regulations of your local Electricity Board.
All work is to be carried out with the equipment
disconnected from electric power and compressed air
supply.
The power consumption value of the SKW is approx. 15 Watts.
The operating voltage of the SKW is 100 V/60 Hz.
Special voltage on request.
Lay a cable (min. 3 x 1 mm
2
) from the single conveyor unit to the SKW.
Install the supplied plugs.
Install the plug of the SKW at the plug connector of the single conveyor control
unit.
Observe the operating instructions of the single conveyor unit.
046-3MS
SKW
In stal la ti on in struc tions 18