Filter
Top Products
www.aleratec.com
19
Using the 1:11 HDD Copy Cruiser IDE/SATA
Main Menu
ReScan Bus
The “ReScan Bus” function causes the 1:11 HDD Copy Cruiser IDE/SATA to
redetect connected hard drives. This can be used when you change drives without
restarting the system.
1. Use the arrow buttons (or) to select “ReScan BUS”. The following screen
will be displayed.
2. Press ENT to select. The system will prompt you to conrm that you wish to
proceed.
3. Press ENTto begin the rescan, during which the following screen will be
displayed.
Note: The order of scanning is CH:0 ~ CH:4.
4. When the rescan is complete, the following screen will be displayed.
ENT ESC
6. ReScan BUS
ENT ESC
ReScan BUS Now?
Yes
ENT ESC
Bus re-scan OK!
Found 6 Devices
ENT ESC
Detect Drives
Please wait...