Filter
Top Products
www.aleratec.com
43
Using the 1:11 HDD Copy Cruiser IDE/SATA
Main Menu
Adv Setup
AdvSetup:H/WDiagnostic
This function is used to test various components of the 1:11 HDD Copy Cruiser
IDE/SATA.
1. Press and hold ESC for about three seconds to access the “Adv Setup”
menu. The following screen will be displayed.
2. Use the arrow buttons (or) to select “H/W Diagnostic”. The following
screen will be displayed.
3. Press ENT to begin the diagnostic tests. The following tests will be
performed: Button Test, Self-Test of SDRAM, Hardware Connection Test,
and Flash Test. Follow the on screen prompts to complete each test. All
test results will be shown in the display panel.
4. When all tests are complete the following information will be displayed.
ESC
11. Adv Setup
ENT
ESC
11-06. Adv Setup
H/W Diagnostic
ENT
ESC
Test Finished
ENT
LCD Test Start Button Test →
SDRAM Test:
8192Kbytes OK
Test IDE 0/1
OK
Flash Test: OK
Test nished