Filter
Top Products
www.aleratec.com
45
Using the 1:11 HDD Copy Cruiser IDE/SATA
Main Menu
Adv Setup
AdvSetup:CopyHPA
If the source hard disk contains a Host Protected Area (HPA), this option
allows you to choose whether or not to copy data within the HPA.
1. Press and hold ESC for about three seconds to access the “Adv Setup”
menu. The following screen will be displayed.
2. Use the arrow buttons (or) to select “Copy HPA”. The following
information will be displayed.
3. Press ENT to display the current conguration setting. A screen similar to
the following will be displayed.
4. Use the arrow buttons () to toggle the option “On” or “Off”. After
changing a setting, remember to press ENT to save it.
Note: The HPA is a hidden data region defined in ATA/ATAPI-4.
This area is not usually accessible to the operating system or
software applications. The 1:11 HDD Copy Cruiser IDE/SATA
supports the copying of data from this hidden area.
ESC
11. Adv Setup
ENT
ESC
11-08. Adv Setup
Copy HPA
ENT
ESC
Copy HPA
Off
ENT