Filter
Top Products
www.aleratec.com
38
Using the 1:11 HDD Copy Cruiser IDE/SATA
Main Menu
Adv Setup
AdvSetup:ReadErrorSkip
This function can be enabled to ignore any error that occurs during copying.
By default, the 1:11 HDD Copy Cruiser IDE/SATA will halt the copy operation
when it encounters an unreadable area of the source hard disk and display an
error. Enabling this option will ignore any bad sectors on the source hard drive
by skipping over them.
Warning: Setting this function to “On” may result in corrupt data on
copied hard drives.
1. Press and hold ESC for about 3 seconds to access the “Adv Setup” menu.
The following screen will be displayed.
2. Use the arrow buttons (or) to scroll to “Read Error Skip”. The
following screen will be displayed.
3. Press ENT to display the current conguration setting. The default setting
is “Off”.
4. Press the arrow buttons (or) to toggle the option “On” or “Off”. After
changing a setting, remember to press ENT to save it.
ENT ESC
11. Adv Setup
ENT ESC
Read Error Skip
Off
ENT ESC
11-01. Adv Setup
Read Error Skip