Filter
Top Products
www.aleratec.com
41
Using the 1:11 HDD Copy Cruiser IDE/SATA
Main Menu
Adv Setup
AdvSetup:QuickEraseHDD
This function is used to erase the data of a hard drive quickly.
Warning: Backup any important data before using this function.
1. Press and hold ESC for about three seconds to access the “Adv Setup”
menu. The following screen will be displayed.
2. Use the arrow buttons (or) to select “Quick Erase HDD”. The
following screen will be displayed.
3. Press ENT, and then use the arrow keys () to select a hard drive to
erase. An example is shown below.
4. Press ENT, and you will be prompted whether you wish to proceed. Use
the arrow keys () to select “Yes” or “No”. The following screen will
be displayed.
5. Press ENT and the Quick Erase will begin. Once complete the following
information will be displayed.
ESC
11. Adv Setup
ENT
ESC
11-04. Adv Setup
Quick Erase HDD
ENT
ESC
1 Target CH:1
HDS721616PLA380
ENT
ESC
All data will be
lost, erase? No
ENT
Erasing Target
Please Wait...
The Selected HDD
Erase Finished