Filter
Top Products
WiFi/Bluetooth Assembly 137
29
WiFi/Bluetooth Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1
Remove the left side-panel. See "Removing the Left Side-Panel" on
page 25.
2
Open the PCI shroud. See "Opening the PCI Shroud" on page 45.
3
Remove the drive-bay shroud. See "Removing the Drive-Bay Shroud" on
page 47.
Removing the WiFi/Bluetooth Card
1
Disconnect the WiFi/Bluetooth assembly cable from the connector on the
master I/O board.
2
Loosen the thumbscrew that secures the WiFi/Bluetooth assembly to the
chassis.
3
Slide and pull the WiFi/Bluetooth assembly away from the chassis.
book.book Page 137 Wednesday, May 16, 2012 2:37 PM