Filter
Top Products
Top I/O Panel 141
30
Top I/O Panel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1
Remove the left side-panel. See "Removing the Left Side-Panel" on
page 25.
2
Open the PCI shroud. See "Opening the PCI Shroud" on page 45.
3
Remove the drive-bay shroud. See "Removing the Drive-Bay Shroud" on
page 47.
4
Remove the PCI-Express x1 card. See "Removing the PCI-Express x1
Card" on page 49.
5
Remove the graphics card. See "Removing the Graphics Card" on page 57.
6
Remove the PCI-fan. See "Removing the PCI-Fan" on page 53.
7
Remove the right-side top panel. See "Removing the Right-Side Top
Panel" on page 107.
8
Remove the right lighting-board. See "Removing the Right Lighting-
Board" on page 117.
9
Remove the right-side middle panel. See "Removing the Right-Side
Middle Panel" on page 113.
10
Remove the right-side bottom panel. See "Removing the Right-Side
Bottom Panel" on page 121.
11
Remove the front bezel. See "Removing the Front Bezel" on page 129.
Removing the Top I/O Panel
1
Push the tab on the panel insert to release the panel insert from the slot on
the chassis.
2
Pull the panel insert away from the chassis.
book.book Page 141 Wednesday, May 16, 2012 2:37 PM