Filter
Top Products
34 Hard-Drive Fan Assembly
Replacing the Hard-Drive Fan Assembly
1
Slide the hard-drive fan assembly into the hard-drive fan assembly bay.
2
Route the cable through the slot in the hard-drive bay and then connect
the hard-drive fan assembly cable to the FAN_HDD connector on the
master I/O board.
3
Replace the drive-bay shroud. See "Replacing the Drive-Bay Shroud" on
page 48.
4
Close the PCI shroud. See "Closing the PCI Shroud" on page 46.
1 hard-drive fan cable 2 hard-drive fan assembly
1
2
book.book Page 34 Wednesday, May 16, 2012 2:37 PM