Filter
Top Products
AT-2711 Series Fast Ethernet Adapter Installation Guide
109
3. Select one of the following options:
Rx & Tx Enabled — Enables the TCP/UDP Checksum Offload
(IPv4) function for both receiving and transmitting IPv4 packets.
This is the default setting.
Disabled — Disables the TCP/UDP Checksum Offload (IPv4)
function for both receiving and transmitting.
Rx Enabled — Enables the TCP/UDP Checksum Offload (IPv4)
function only for receiving IPv4 packets.
Tx Enabled — Enables the TCP/UDP Checksum Offload (IPv4)
function only for transmitting IPv4 packets.
4. Click OK.