Filter
Top Products
AT-2711 Series Fast Ethernet Adapter Installation Guide
95
Large Send Offload v2 (IPv6)
The Large Send Offload v2 (IPv6) feature allows you to control the load of
sending out large packets. When this feature is enabled, the AT-2711
series adapter segments large packets for IPv6 traffic and reduces the
CPU load.
To enable or disable the Large Send Offload v2 (IPv6) feature, do the
following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 76.
2. Select Large Send Offload v2 (IPv6) in the Property box.
The Large Send Offload v2 (IPv6) page is displayed as shown in
Figure 51.
Figure 51. Large Send Offload (IPv6) Page
3. Select one of the following options:
Disable — The adapter does not segment packets for IPv6 traffic.
Enable — The adapter segments large packets up to 256kb for
IPv6 traffic before sending them out. This is the default setting.
4. Click OK.