Filter
Top Products
Page 156
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
– 30 Sec — Indicates that the RMON statistics are refreshed every 30 seconds.
– 60 Sec — Indicates that the RMON statistics are refreshed every 60 seconds.
– No Refresh—Indicates that the RMON statistics are not refreshed.
• Received Bytes (Octets) — Displays the number of octets received on the interface since the device was
last refreshed. This number includes bad packets and FCS octets, but excludes framing bits.
• Received Packets — Displays the number of packets received on the interface, including bad packets,
Multicast and broadcast packets, since the device was last refreshed.
• Broadcast Packets Received — Displays the number of good broadcast packets received on the interface
since the device was last refreshed. This number does not include Multicast packets.
• Multicast Packets Received — Displays the number of good Multicast packets received on the interface
since the device was last refreshed.
• CRC & Align Errors — Displays the number of CRC and Align errors that have occurred on the interface
since the device was last refreshed.
• Undersize Packets — Displays the number of undersized packets (less than 64 octets) received on the
interface since the device was last refreshed.
• Oversize Packets — Displays the number of oversized packets (over 1518 octets) received on the interface
since the device was last refreshed.
• Fragments — Displays the number of fragments (packets with less than 64 octets, excluding framing bits, but
including FCS octets) received on the interface since the device was last refreshed.
• Jabbers — Displays the
total number of received packets that were longer than 1518 octets. This number
excludes frame bits, but includes FCS octets that had either a bad Frame Check Sequence (FCS) with an
integral number of octets (FCS Error) or a bad FCS with a non-integral octet (Alignment Error) number. The field
range to detect jabbers is between 20 ms and 150 ms.
• Collisions — Displays the number of collisions received on the interface since the device was last refreshed.
• Frames of xx Bytes — Displays the number of xx-byte frames received on the interface since the device
was last refreshed.
2. Select the Interface and the Refresh Rate. The selected interface’s RMON statistics are displayed.