Allied Telesis AT-8000S Switch User Manual


 
Page 60
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
Active — Indicates the port is currently monitored.
Ready — Indicates the port is not currently monitored.
2. Click Modify. The Modify Mirror Page opens:
Figure 36: Modify Mirror Page
The Modify Mirror Page contains the following fields:
Unit Number— Displays the stacking member for which the port is defined.
Zoom View - Port Mirror — Displays the status of mirror ports and enables port selection. The possible
values are:
3. Click the ports to mirror. Clicking a port toggles it through the possible settings.
4. Click Enable Mirror.
5. Click Apply. The port mirror status indicators are updated.
6. Click Refresh in the Port Mirroring Page. Port mirroring information is updated. The port mirror is now active
on the device. You can connect a data analyzer to the destination port to monitor the traffic on the source
ports.
7. Click Save Config on the menu to permanently save the change.
Mirror to Port — Indicates the destination (mirror) port. There can be only one destination port.
Mirror Ingress Port — Indicates that the port is currently defined as
source port. The port’s ingress
traffic is mirrored to the destination port.
Mirror Egress Port — Indicates that the port is currently defined as source port. The port’s egress traffic
is mirrored to the destination port.
Mirror Ingress/Egress Port — Indicates that the port is currently defined as source port. The port’s
ingress and egress traffic is mirrored to the destination port.