Filter
Top Products
Page 58
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
– Disable — Indicates that flow control is currently disabled for the selected port.
• MDI/MDIX — Displays the MDI/MDIX status on the port. Hubs and switches are deliberately wired opposite
the way end stations are wired, so that when a hub or switch is connected to an end station, a straight through
Ethernet cable can be used, and the pairs are matched up properly. When two hubs or switches are
connected to each other, or two end stations are connected to each other, a crossover cable is used to ensure
that the correct pairs are connected. The possible field values are:
– Auto — Use to automatically detect the cable type.
– MDI (Media Dependent Interface) — Use for end stations.
– MDIX (Media Dependent Interface with Crossover) — Use for hubs and switches.
4. Define the fields.
5. Click Apply. The port settings are saved and the device is updated. The Port Settings Page is displayed.
6. Click Save Config on the menu to permanently save the change.