Filter
Top Products
7
Figure 1: Front Panel of the AT-IX5-28GPX Switch .............................................................................................................19
Figure 2: Back Panel of the Switch.......................................................................................................................................19
Figure 3: AT-IX5-28GPX Management Panel ......................................................................................................................20
Figure 4: LEDs for the 10/100/1000Base-T Ports.................................................................................................................31
Figure 5: SFP+ Slot LEDs ....................................................................................................................................................32
Figure 6: Switch ID LED .......................................................................................................................................................34
Figure 7: Switch ID LED .......................................................................................................................................................34
Figure 8: Switch ID LEDs in the Low Power Mode...............................................................................................................35
Figure 9: AT-PWR800 Power Supply...................................................................................................................................38
Figure 10: Stacking Transceivers.........................................................................................................................................42
Figure 11: Stack of Two Switches in the Linear Topology....................................................................................................44
Figure 12: Stack of Four Switches in the Linear Topology ...................................................................................................45
Figure 13: Stack of Two Switches in the Ring Topology ......................................................................................................46
Figure 14: Stack of Four Switches in the Ring Topology......................................................................................................47
Figure 15: PORT Parameter in the Command Line Interface...............................................................................................50
Figure 16: Components of the switch ...................................................................................................................................59
Figure 17: Power Cord Retaining Clip ..................................................................................................................................62
Figure 18: Inserting the Retaining Clip into the Retaining Bracket .......................................................................................62
Figure 19: Removing the rear panel.....................................................................................................................................63
Figure 20: Installing the AT-PWR800 Power Supply Module ...............................................................................................64
Figure 21: Securing the AT-PWR800 Power Supply Module ...............................................................................................65
Figure 22: Installing the Blank Panel on the Power Supply Slot...........................................................................................65
Figure 23: Turning the Switch Upside Down ........................................................................................................................67
Figure 24: Removing the Rubber Feet ............................................................................................
.....................................67
Figure 25: Attaching the Equipment Rack Brackets.............................................................................................................68
Figure 26: Mounting the Switch Horizontally in an Equipment Rack ....................................................................................69
Figure 27: Mounting the Switch Vertically in an Equipment Rack ........................................................................................69
Figure 28: Power Cord Retaining Clip in the Up Position.....................................................................................................70
Figure 29: Connecting the AC Power Cord ..........................................................................................................................70
Figure 30: Connecting the Management Cable to the Console Port....................................................................................72
Figure 31: Switch Initialization Messages.............................................................................................................................74
Figure 32: Switch Initialization Messages (Continued).........................................................................................................74
Figure 33: Switch Initialization Messages (Continued).........................................................................................................75
Figure 34: User Exec Mode Prompt .....................................................................................................................................78
Figure 35: SHOW STACK Command...................................................................................................................................79
Figure 36: Moving to the Global Configuration Mode...........................................................................................................79
Figure 37: Confirmation Prompt for the NO STACK ENABLE Command ............................................................................80
Figure 38: Returning to the Privileged Exec Mode...............................................................................................................80
Figure 39: Saving the Changes with the WRITE Command.................................................................................................80
Figure 40: Status of a Stacking Slot When VCStack is Disabled .........................................................................................81
Figure 41: Status of a Stacking Slot When VCStack is Enabled..........................................................................................82
Figure 42: PORT Parameter in the Command Line Interface...............................................................................................83
Figure 43: User Exec Mode Prompt .....................................................................................................................................87
Figure 44: Moving to the Privileged Exec Mode with the ENABLE Command.....................................................................87
Figure 45: Moving to the Global Configuration Mode with the CONFIGURE TERMINAL Command ..................................88
Figure 46: Activating VCStack with the STACK ENABLE Command...................................................................................88
Figure 47: Returning to the Privileged Exec Mode with the EXIT Command .......................................................................88
Figure 48: Saving the Change with the WRITE Command ..................................................................................................88
Figure 49: Rebooting the Switch with the REBOOT Command ...........................................................................................89
Figures