Filter
Top Products
Installation
23
Unpacking the Network Extender
To unpack the network extender:
1. Remove all components from the shipping package and store the
packaging material in a safe location.
Note
You must use the original shipping material if you need to return the
unit to Allied Telesyn.
2. Place the network extender on a level, secure surface.
3. Make sure the following hardware components are included in your
network extender package. If any item is missing or damaged, contact
your Allied Telesyn sales representative for assistance.
❑ One AT-MC601 or AT-MC602 Network Extender
❑ Four protective feet
❑ Two Phillips-head screws for wall-mounting
❑ Two plastic anchors for wall-mounting
❑ One cable lug
❑ One M4 x 8mm screw
❑ One power adapter
❑ One management cable (provided for AT-MC602 model only)
❑ Documentation and configuration software CD
❑ Warranty and registration card