Filter
Top Products
AT-MC601, AT-MC602 Installation and User’s Guide
46
time, a timeout will occur. After a timeout, the default configuration
parameters will be used to establish a link with the highest possible speed.
The default configuration parameters start at 0.94 Mbps upstream and
downstream with negotiation set from Low -> High.
Select the option that corresponds to your mode choice and click the Apply
button.
When the mode has been set, the AT-MC60x Configurator Done message
will appear, as displayed in Figure 31.
Figure 31 Done Message
When you have finished setting the mode on the Subscriber unit, click the
Close button on the bottom right of the AT-MC60x Configurator menu to
exit from the configuration software.