Filter
Top Products
AT-MC601, AT-MC602 Installation and User’s Guide
36
Starting a Configuration Session
Downloading
Software Updates
In order to configure and manage your AT-MC601 and AT-MC602 VDSL
network extenders, you need to download a copy of the configuration
software onto the computers you will use to manage the units. The AT-S57
configuration software is included on the Documentation CD provided
with the units.
New releases of the AT-S57 configuration software are available from the
Allied Telesyn Web site at www.alliedtelesyn.com or from our FTP server
at ftp.alliedtelesyn.com. To log on to the FTP server, enter “anonymous”
for the user name and your email address for the password. Management
software for the AT-MC601 and AT-MC602 VDSL network extenders
will have “S57” as part of the file name.
Cabling
Preparations
Once you have a copy of the software on your computer, connect the
Provider unit to your computer using the management cable provided, as
shown in Figure 23. Attach the 9-pin RS-232 end of the cable to the COM
1 or COM 2 port on your computer. Attach the 8-pin DIN end of the cable
to the management port on the unit.
Figure 23 Connecting the Management Cable
If the network extender is not already on, power on the unit using the
power cable provided. Refer to ”Powering On the Subscriber Unit” on page
27 for further instructions on how to power on the unit.
L
I
N
E
1
0
B
a
s
e
T
/
1
0
0
B
a
s
e
T
X
P
S
T
N
L
I
N
K
A
C
T
P
W
R
E
R
R
L
I
N
K
M
G
M
T
A
T
-
M
C
6
0
2
VDSL EXTENDED ETHERNET