Filter
Top Products
MULTITASKER™
400-0132-005
22
43. [MUT0] MT110-102 ONLY
This command turns on the all the outputs
without changing the input port selected and
without changing any volume settings.
Command Format: [MUT0CnUi]
Cn = Card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
Send the command [MUT0C4] to enable the
outputs for the card in slot 4.
44. [MUT1] MT110-102 ONLY
This command turns off all the outputs without
changing the input port selected and without
changing any output volume settings.
Command Format: [MUT1CnUi]
Cn = Card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
Send the command [MUT1C4] to mute all the
outputs for the card in slot 4.
45. [MATmXy]
The matrix command allows the matrix switcher
to be setup for different matrix sizes. The
following tables show how the inputs and
outputs will be configured when the matrix is
changed. The input and output layouts are as
viewed from the front of the card.
Example:
In the 8x4 configuration, when Input 1 is
connected to Output 4, the entire channel, 1a
and 1b, will be switched to outputs 4a and 4b
respectively.
Command Format: [MATmXyCnUi]
m = number of inputs (m = 16, 8 or 4)
y = number of outputs (y = 8, 4 or 2)
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
16 x 8
INPUTS OUTPUTS
9 1 1
10 2 2
11 3 3
12 4 4
13 5 5
14 6 6
15 7 7
16 8 8
8 x 4
INPUTS OUTPUTS
5 a 1 a 1 a
5 b 1 b 1 b
6 a 2 a 2 a
6 b 2 b 2 b
7 a 3 a 3 a
7 b 3 b 3 b
8 a 4 a 4 a
8 b 4 b 4 b
4 x 2
INPUTS OUTPUTS
3 a 1 a 1 a
3 b 1 b 1 b
3 c 1 c 1 c
3 d 1 d 1 d
4 a 2 a 2 a
4 b 2 b 2 b
4 c 2 c 2 c
4 d 2 d 2 d
46. [HELP]
This command displays information available for
the MultiTasker™ interface commands.
Command Format: [HELPCnUi]
Cn = Card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)