Altinex MT110-100/102 Switch User Manual


 
MULTITASKER
400-0132-005
2
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
MT110-100/102. Keep this manual handy for future
reference. These safety instructions are to ensure
the long life of your MT110-100/102 and to prevent
fire and shock hazard. Please read them carefully
and heed all warnings.
1.1 GENERAL
Qualified ALTINEX service personnel, or their
authorized representatives must perform all
service.
1.2 INSTALLATION
To prevent fire or shock, do not expose this unit
to rain or moisture. Do not place the
MT110-100/102 in direct sunlight, near heaters
or heat radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam
can harm internal components
Handle the MT110-100/102 carefully. Dropping
or jarring can damage the card.
Do not pull the cables that are attached to the
MT110-100/102.
Insert the card carefully into the slots of the
Multi-Tasker™ without bending any edges.
1.3 CLEANING
Clean only the connector area with a dry cloth.
Never use strong detergents or solvents, such
as alcohol or thinner. Do not use a wet cloth or
water to clean the card. Do not clean or touch
any component or PCB.
1.4 FCC / CE NOTICE
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at their expense.
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.