Filter
Top Products
Chapter 2. CLI Syntax Reference
26 3ware Serial ATA RAID Controller CLI Guide
show alarms [reverse]
This command shows the alarms or AEN messages of all controllers in the
system. The default is to display the most recent message first. The reverse
attribute displays the most recent message last.
show diag
This command shows the diagnostic information of all controllers in the
system.
show rebuild
This command displays all rebuild schedules for the 9000 controllers in the
system.
The rebuild rate is also applicable for initializing, migrating, and recovery
background tasks.
Example:
//localhost> show rebuild
Rebuild Schedule for Controller /c0
========================================================
Slot Day Hour Duration Status
--------------------------------------------------------
1 Sun 12:00am 24 hr(s) disabled
2 Mon 12:00am 24 hr(s) disabled
3 Tue 12:00am 24 hr(s) disabled
4 Wed 12:00am 24 hr(s) disabled
5 Thu 12:00am 24 hr(s) disabled
6 Fri 12:00am 24 hr(s) disabled
7 Sat 12:00am 24 hr(s) disabled
For additional information about rebuild schedules, see “/cx add
rebuild=ddd:hh:duration” on page 50, and see the discussion of background
tasks and schedules in 3ware Serial ATA RAID Controller User Guide.