Filter
Top Products
Help Commands
www.3ware.com 85
help
This help command provide a table of contents, providing help with the
overall navigation of the CLI commands. Typical output looks like the
following.
//localhost> help
Copyright(c) 2004, 2005 Applied Micro Circuits Corporation
(AMCC). All rights reserved.
AMCC/3ware CLI (version 2.x)
Commands Description
--------------------------------------------------------------
show Displays information about controller(s), unit(s) and port(s).
flush Flush write cache data to units in the system.
rescan Rescan all empty ports for new unit(s) and disk(s).
update Update controller firmware from an image file
/cx Controller specific commands.
/cx/ux Unit specific commands.
/cx/px Port specific commands.
/cx/bbu BBU specific commands. (9000 only)
/ex Enclosure specific commands. (9550SX and 9590SE only)
/ex/slotx Slot specific commands.
/ex/fanx Fan specific commands.
/ex/tempx Enclosure Temperature Sensor specific commands.
Certain commands are qualified with constraints of controller type/model
support. Please consult the tw_cli documentation for explanation of the
controller-qualifiers.
The controller-qualifiers of the Enclosure commands (/ex) also apply to
Enclosure Element specific commands (e.g., /ex/elementx).
Type help <command> to get more details about a particular command. For more
detail information see tw_cli's documentation.
help
show
This command provides specific show-related help, illustrating various ways
to use the show command. It provides reports on Controllers, Units and
Drives. See the section “Shell Object Commands” on page 19 for more
information.
help
flush
This command provides specific flush-related help, illustrating various ways
to use the flush command. See the section “Shell Object Commands” on
page 19 for more information.