Filter
Top Products
InfraStruXure System—Installation and Start-Up 37
Appendix A: Operation
How to Apply Power to the System
This procedure instructs on how to apply power to a system that has already been installed. For initial
start-up instructions, see the Start-up section of this manual.
1. Close (turn ON) the main circuit breaker of the
power source supplying power to the PDU.
2. Set the Main Input on the PDU to ON.
3. Power the PDU distribution circuit breakers:
a. For PDU with transformer: Set the Main
Output circuit breaker on the PDU to ON.
Note
After the Main Output breaker has been closed, both PDU distribution panels will
be energized.