Filter
Top Products
Broadband Automatic Disconnect Switch User Manual 3
Introduction
Introduction
About this unit
Redundant power and output voltage monitoring for Broadband cable systems is provided with the use of two
APC Automatic Disconnect Switches and two Ferroresonant Power Supplies (FRP).
Safety
Specifications
Environmental Specifications
Electrical Warnings
Do not work alone under hazardous conditions.
High current through conductive materials could cause severe burns.
Do not work alone under hazardous conditions.
High current through conductive materials could cause severe burns.
Do not handle any metallic connector before the power hs been disconnected.
When grounding cannot be verified disconnect the equipment from the utility
power outlet before installing or connecting to other equipment. Reconnect the
power cord only after all connections are made.
Check that the power cord(s), plug(s), and socket(s) are in good condition.
Replacement of fuses or other parts must be with identical types and ratings.
Substitution of nonidentical parts may cause safety and fire hazards.
In order to maintain compliance with the EMC directive for products sold in
Europe, output cords attached to the UPS should not exceed 10 meters in length.
Temperature
Operating: 32° to 122°F (0° to 50°C)
Storage: 5
° to 122°F (-15° to 50°C)
Humidity
0 to 95%
Elevation
0 to 10,000 feet (0 to 3,000 meters)