Filter
Top Products
Symmetra® MW with Internal Bypass Static Switch - User Guide - 990-1756A-001 15
Network Configuration Screens
There are five Network Configuration screens that will be described below:
• Network Settings screen
• E-mail Settings screen
• SNMP Settings screen
• Remote Monitoring Service Settings screen
• APC ISX Manager Settings screen
Network Settings screen
All network settings information must be provided before any network functions can be used.
• Enable Network: Use the checkbox to connect or disconnect the UPS from the network.
IP Settings.
• IP address: The static IP address.
• Subnet Mask: The subnet mask for the network segment that the UPS is on.
• Gateway: The network gateway for the segment that the UPS is on.
DNS Settings.
• Primary DNS server: The IP address of the DNS server to be used by the UPS (optional).
• Secondary DNS server: The IP address of a DNS server to use if the primary server is not
available (optional).
Normal
Normal
Network Configuration
Network Settings
5.39 PM
Page 1 of 5
IP address
Subnet mask
Gateway
Enable network
Apply Changes
xxx.xxx.xxx.xxx
xxx.xxx.xxx.x
xxx.xxx.xxx.x
UPS1
IP Settings Host Name Settings
DNS Settings
Primary DNS server
Secondary DNS server
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
company.com
Hostname
Domain name
xxxxxx.xxxx@xxx.xx
SMTP Settings
company.com
From address
SMTP server